9″ Fanuc monitor A61L-0001-0093(Model: KF-M7099H, MDT947B-2B), is from the early / mid 90’s. This Fanuc monitor was fitted on the most popular CNC control in existance, the Fanuc control system 18-M,21-M, 0-C, 0iM-tb series, including the 0-TC and 0-MC controls, The monitor is a 9″ amber mono monitor, dual frequency – allowing highlighting.
![](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0093_08.jpg)
Replacement Specifications type: A61L-0001-0093 LED TFT , industrial LCD panel, HONDA 20 pin signal connector, DC24 V power supply , separate OSD keypad, easy to mount and setup.
Installation effect 1
Installation effect 2
![](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0093_05.jpg)
Note: Install and use directly without modification
FANUC 0-TD Replace effect with LCD
![A61L-0001-0093 LCD](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0093_04.jpg)
FANUC 18-M Replace effect with LCD![FANUC A61L-0001-0093 Color tft](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0093_03.jpg)
![FANUC A61L-0001-0093 LCD](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0093_01.jpg)
FANUC 21-M Replace effect with LCD
Note:
FANUC A61L-0001-0093(Model: KF-M7099H, MDT947B-2B) LED TFT supports monochrome display and color display, automatic recognition.
RELATED PRODUCTS
![A61L-0001-0095_LED](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0095_05.jpg)
A61L-0001-0095
![](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0092-2.jpg)
A61L-0001-0092
![A61L-0001-0074 LCD](https://en.elongshine.com/wp-content/uploads/2019/11/A61L-0001-0074_06.jpg)
A61L-0001-0074